Experience sportiness.<br/>The Audi TTS Coupé TFSI.<br/>

Fuel consumption combined¹: 7.4–7.3 l/100 km<br/>CO₂ emissions combined¹: 169–168 g/km<br/><br/>Feel the pure power, experience the dynamic handling and enjoy the sporty exterior and interior design – the TTS Coupé TFSI².

Top performance numbers

Output

235

kW*

(320 hp)

Acceleration

4.5

s*

0 to 100 km/h

Torque

400

Nm*

*Fuel consumption combined¹: 7.4–7.3 l/100 km; CO₂ emissions combined¹: 169–168 g/km.

Colors and wheels

Combine different paint finishes and wheels with one another to create an Audi TTS Coupé TFSI² entirely according to your ideas.

Panoramic view

Note: Experience the Audi TTS Coupé TFSI² from different angles in this 360-degree animation.

Front view of the Audi TTS Coupé including Audi Matrix LED headlights

See and be seen

With the optional matrix LED headlights with dynamic indicator, you no longer have to constantly switch between main beam and dipped beam when it is dark outside. A control unit reacts to the current traffic situation and turns individual LEDs on or off.

Man with sunglasses

Better overview

In the Audi TTS Coupé TFSI², intelligent driver assist systems⁵ make your life easier. Benefit from technology such as the optional Audi side assist⁵ lane-change assistant, which alerts you by means of a warning LED when you fail to notice a vehicle in your blind spot. The option-al park assist⁵ with 360° display and reversing camera guides you gently into any space.

Back to top

© 2021 AUDI AG. All Rights Reserved.

The specified fuel consumption and emission data have been determind according to the measurement procedures prescribed by law. Since 1st September 2017, certain new vehicles are already being type-approved according to the Worldwide Harmonized Light Vehicles Test Procedure (WLTP), a more realistic test procedure for measuring fuel consumption and CO2 emissions. Starting on September 1st 2018, the New European Driving Cycle (NEDC) will be replaced by the WLTP in stages. Owing to the more realistic test conditions, the fuel consumption and CO2 emissions measured according to the WLTP will, in many cases, be higher than those measured according to the NEDC. Therefore, the usage of CO2 emission values measured according to WLTP for vehicle taxation from 1st September 2018 on can cause changes in this regard as well. For further information on the differences between the WLTP and NEDC, please visit www.audi.de/wltp.




We are currently still required by law to state the NEDC figures. In the case of new vehicles which have been type-approved according to the WLTP, the NEDC figures are derived from the WLTP data. It is possible to specify the WLTP figures voluntarily in addition until such times as this is required by law. In cases where the NEDC figures are specified as value ranges, these do not refer to a particular individual vehicle and do not constitute part of the sales offering. They are intended exclusively as a means of comparison between different vehicle types. Additional equipment and accessories (e.g. add-on parts, different tyre formats, etc.) may change the relevant vehicle parameters, such as weight, rolling resistance and aerodynamics, and, in conjunction with weather and traffic conditions and individual driving style, may affect fuel consumption, electrical power consumption, CO2 emissions and the performance figures for the vehicle. Further information on official fuel consumption figures and the official specific CO₂ emissions of new passenger cars can be found in the guide “Information on the fuel consumption, CO₂ emissions and electricity consumption of new cars”, which is available free of charge at all sales dealerships and from DAT Deutsche Automobil Treuhand GmbH, Hellmuth-Hirth-Strasse 1, 73760 Ostfildern-Scharnhausen, Germany (www.dat.de).