Skip to Content

Technology & Digitalisation

The interior of the Q3 Sportback with steering wheel, panoramic display, and red ambient lighting package.

Fuel consumption (combined): 9.0–5.3 l/100 km; CO₂ emissions (combined): 205–138 g/km; CO₂ emission classes: G-E.

Lighting the way forward.

Your Audi shows you the way in style – by day and by night. And always puts you in the best light.

A panoramic view every day.

For overview and high operating convenience: the panoramic display combines the Audi virtual cockpit plus with the MMI touch display in one sweep.

Experience pure fascination.

High-performance powertrains and characteristic Audi handling turn your journey into a special moment.

The Q3 Sportback on a public road. The image shows the adaptive driver assistance system's detection of lane boundaries, marked in blue and yellow.
Smart companions.

Adaptive cruise assist plus with emergency assist*, * is supported by online data* for the first time and can therefore improve the system’s availability and performance, e.g. when detecting lane boundaries.

Compare models in this series.

A green Q3 SUV is parked in front of a modern building.

Q3 SUV

• Power up to 195 kW

• Acceleration (0–100 km/h) up to 5.7 s

• Luggage compartment volume up to 1,386 l

Fuel consumption (combined): 9.0–5.3 l/100 km; CO₂ emissions (combined): 205–137 g/km; CO₂ emission classes: G-E.

Back to top

© 2026 AUDI AG. All Rights Reserved.

The specified fuel consumption and emission data have been determind according to the measurement procedures prescribed by law. Since 1st September 2017, certain new vehicles are already being type-approved according to the Worldwide Harmonized Light Vehicles Test Procedure (WLTP), a more realistic test procedure for measuring fuel consumption and CO2 emissions. Starting on September 1st 2018, the New European Driving Cycle (NEDC) will be replaced by the WLTP in stages. Owing to the more realistic test conditions, the fuel consumption and CO2 emissions measured according to the WLTP will, in many cases, be higher than those measured according to the NEDC. Therefore, the usage of CO2 emission values measured according to WLTP for vehicle taxation from 1st September 2018 on can cause changes in this regard as well. For further information on the differences between the WLTP and NEDC, please visit www.audi.de/wltp.




We are currently still required by law to state the NEDC figures. In the case of new vehicles which have been type-approved according to the WLTP, the NEDC figures are derived from the WLTP data. It is possible to specify the WLTP figures voluntarily in addition until such times as this is required by law. In cases where the NEDC figures are specified as value ranges, these do not refer to a particular individual vehicle and do not constitute part of the sales offering. They are intended exclusively as a means of comparison between different vehicle types. Additional equipment and accessories (e.g. add-on parts, different tyre formats, etc.) may change the relevant vehicle parameters, such as weight, rolling resistance and aerodynamics, and, in conjunction with weather and traffic conditions and individual driving style, may affect fuel consumption, electrical power consumption, CO2 emissions and the performance figures for the vehicle. Further information on official fuel consumption figures and the official specific CO₂ emissions of new passenger cars can be found in the guide “Information on the fuel consumption, CO₂ emissions and electricity consumption of new cars”, which is available free of charge at all sales dealerships and from DAT Deutsche Automobil Treuhand GmbH, Hellmuth-Hirth-Strasse 1, 73760 Ostfildern-Scharnhausen, Germany (www.dat.de).

Loading..