Fernsteuerung Standheizung

Komfortables Starten der Standheizung über Smartphone-App (nur in Verbindung mit der optionalen Ausstattung Standheizung).

Mit dem Audi MMI in Ihrem Fahrzeug, Ihrer Fernbedienung oder der myAudi mobile assistant-App können Sie Ihre Standheizung steuern und den Innenraum Ihres Fahrzeugs manuell oder zu einer vorher angegebenen Zeit erwärmen und belüften.

Durch den Audi connect Service Fernsteuerung Standheizung behalten Sie dabei jederzeit und überall die Übersicht über den aktuellen Status Ihrer Heizung sowie über die letzten zehn ausgeführten Aktionen.

 

Mit dem Service Fernsteuerung Standheizung ist es nicht möglich, den Heizvorgang zu starten, zu stoppen oder zu programmieren. Verwenden Sie hierfür das Audi MMI in Ihrem Fahrzeug, Ihre Standheizungsfernbedienung oder laden Sie die myAudi mobile assistant-App auf Ihr Mobiltelefon oder Tablet.

Back to top

© 2025 AUDI AG. All Rights Reserved.

The specified fuel consumption and emission data have been determind according to the measurement procedures prescribed by law. Since 1st September 2017, certain new vehicles are already being type-approved according to the Worldwide Harmonized Light Vehicles Test Procedure (WLTP), a more realistic test procedure for measuring fuel consumption and CO2 emissions. Starting on September 1st 2018, the New European Driving Cycle (NEDC) will be replaced by the WLTP in stages. Owing to the more realistic test conditions, the fuel consumption and CO2 emissions measured according to the WLTP will, in many cases, be higher than those measured according to the NEDC. Therefore, the usage of CO2 emission values measured according to WLTP for vehicle taxation from 1st September 2018 on can cause changes in this regard as well. For further information on the differences between the WLTP and NEDC, please visit www.audi.de/wltp.




We are currently still required by law to state the NEDC figures. In the case of new vehicles which have been type-approved according to the WLTP, the NEDC figures are derived from the WLTP data. It is possible to specify the WLTP figures voluntarily in addition until such times as this is required by law. In cases where the NEDC figures are specified as value ranges, these do not refer to a particular individual vehicle and do not constitute part of the sales offering. They are intended exclusively as a means of comparison between different vehicle types. Additional equipment and accessories (e.g. add-on parts, different tyre formats, etc.) may change the relevant vehicle parameters, such as weight, rolling resistance and aerodynamics, and, in conjunction with weather and traffic conditions and individual driving style, may affect fuel consumption, electrical power consumption, CO2 emissions and the performance figures for the vehicle. Further information on official fuel consumption figures and the official specific CO₂ emissions of new passenger cars can be found in the guide “Information on the fuel consumption, CO₂ emissions and electricity consumption of new cars”, which is available free of charge at all sales dealerships and from DAT Deutsche Automobil Treuhand GmbH, Hellmuth-Hirth-Strasse 1, 73760 Ostfildern-Scharnhausen, Germany (www.dat.de).