Feeling safe.

Feel even safer while travelling with the services of Audi connect. Services like emergency call which will automatically contact the Audi emergency call centre after an accident and online roadside assistance will connect you with the Audi service centre if you experience a flat tyre or need towing service. The vehicle status report puts all the information about your Audi at your fingertips, whenever you need it.

563x317_AA3_E_11100.jpg

Emergency call

Automatically places an emergency call in the event of an emergency. To ensure a rapid and targeted response, relevant data such as your location and the severity of your accident are transferred to the Audi emergency call centre. You can also trigger the emergency call manually if you are coming to the aid of other motorists or otherwise need assistance.

563x317_AS6_E_10106.jpg

Online roadside assistance

This service brings you fast and efficient roadside assistance. Just press the service call button in the compartment ceiling and you'll be connected directly to the Audi service centre.

563x317_Direktannahme_Serviceberater_Kunde_2.jpg

Audi service request

After registering for and activating myAudi, have the system tell you when your next scheduled service is due at your selected Audi service partner. The Audi service partner will contact you and set up your next visit.

563x317_AA3_E_141016.jpg

Remote lock & unlock

Use the Audi MMI connect app on your smartphone at any time to see whether your vehicle is locked or not. If your Audi is unlocked, just press the button and lock it. How easy is that?

563x317_AOZ_DIV_121050.jpg

Remote auxiliary heating

Start the auxiliary heating for your Audi easily and conveniently with the Audi MMI connect app on your smartphone. (Optional equipment required.)

563x317_AA3_P_10183.jpg

Vehicle status report

Use the vehicle status report service to know your Audi's status before you start it. For example, if you need to refuel and should leave a few minutes earlier today. The report also includes oil levels and maintenance intervals.

563x317_AA3_E-TRON_141015_1.jpg

Audi connect e-tron services

Especially for e-tron vehicles, Audi connect services via the Audi MMI connect app and myAudi allow you to check specific information such as the current battery charge level or the remaining distance you can drive on your current charge. You can also plan and control your charging processes and your vehicle's climate controls conveniently from afar. This way your vehicle will not only be charged at the scheduled departure time, but also have the optimal ambient climate, too. This also optimises the distance you can drive on your current charge.

563x317_AA3_P_131011.jpg

Theft alarm notification

This service provides effective protection against theft, vehicle break-ins, and tyre theft; the entire interior is also monitored by ultrasound. If the theft alarm is triggered, you will receive a message on your phone immediately.

563x317_platzhalter.jpg

    

Back to top

© 2021 AUDI AG. All Rights Reserved.

The specified fuel consumption and emission data have been determind according to the measurement procedures prescribed by law. Since 1st September 2017, certain new vehicles are already being type-approved according to the Worldwide Harmonized Light Vehicles Test Procedure (WLTP), a more realistic test procedure for measuring fuel consumption and CO2 emissions. Starting on September 1st 2018, the New European Driving Cycle (NEDC) will be replaced by the WLTP in stages. Owing to the more realistic test conditions, the fuel consumption and CO2 emissions measured according to the WLTP will, in many cases, be higher than those measured according to the NEDC. Therefore, the usage of CO2 emission values measured according to WLTP for vehicle taxation from 1st September 2018 on can cause changes in this regard as well. For further information on the differences between the WLTP and NEDC, please visit www.audi.de/wltp.




We are currently still required by law to state the NEDC figures. In the case of new vehicles which have been type-approved according to the WLTP, the NEDC figures are derived from the WLTP data. It is possible to specify the WLTP figures voluntarily in addition until such times as this is required by law. In cases where the NEDC figures are specified as value ranges, these do not refer to a particular individual vehicle and do not constitute part of the sales offering. They are intended exclusively as a means of comparison between different vehicle types. Additional equipment and accessories (e.g. add-on parts, different tyre formats, etc.) may change the relevant vehicle parameters, such as weight, rolling resistance and aerodynamics, and, in conjunction with weather and traffic conditions and individual driving style, may affect fuel consumption, electrical power consumption, CO2 emissions and the performance figures for the vehicle. Further information on official fuel consumption figures and the official specific CO₂ emissions of new passenger cars can be found in the guide “Information on the fuel consumption, CO₂ emissions and electricity consumption of new cars”, which is available free of charge at all sales dealerships and from DAT Deutsche Automobil Treuhand GmbH, Hellmuth-Hirth-Strasse 1, 73760 Ostfildern-Scharnhausen, Germany (www.dat.de).